5 elements of the corrugated box design

1. Reasonable size ratio

The reasonable ratio is the primary factor affect the corrugated box performance in the corrugated box design, for example, the corrugated box tightly wrapped products or the setup gift box internal combination state, virtual space ratio etc., it must be properly handled in the corrugated box design in order to effectively guarantee the stability and convenience of the carton in the circulation process, of course, it is an important factor affect the beauty of the corrugated box. The corrugated box size ratio determined by the cardboard dosage, strength factors, stacking state and even aesthetic factors.

2. Caliper

During the folding process, due to the thickness of the paper material, the corrugated box size will be changed after molding. In addition, if the thickness of the corrugated box hasn't accounted, the corrugated ​​box is not flat, even can not be molding or scrapped. Typically, after the graphic design of the corrugated box, the factory will make sample box to test in case found unsuitable factors should be adjusted on time, otherwise there will be irreparable huge losses due to the improper corrugated box design.

3. With scientific principles, to ensure that the performance of the corrugated box

The corrugated box design should meet the scientific principles, such as the production principle and physical properties principle. During the mechanized production, generally the paper in reel production, the raw paper pass through the roll will make fibrous tissue change direction due to the manufacturing process, it has vertical stripes and stripes fiber organizational structures. When the pressure of the paper through the printing press, the paper is usually toward the extending direction of the vertical lines while the stripes direction shrinkage, which is the ductility of the paper. So if the corrugated box production can not be reasonably applied the grain direction of the paper will make the corrugated box uneven.

4. Cost

The corrugated box design must consider the economic cost, else it doesn't have the operation feasibility. It is necessary to emphasize that in the proper performance of the packaging effect to meet the packaging function based on the cost of packaging. Firstly, the amount of material selection should be appropriate, try to take full advantages of the materials. Secondly, the packaging structure is simple and neat, the process as simple as possible and easy to operate, and so improve the work efficiency to control the cost.

5. Aesthetic

In the corrugated box structural design, for the point view of aesthetics, it must pay attention to the details of the structure. For example, the incision treatment, in order to let the cardboard cutting cross-section to be seen to affect the appearance it should to make the cover and tongue design as one, and then fold 45°angle. Again, the cross-section as much as possible does not appear in the main display surface, usually it placed on the back or the side surface. Also, in the handling of the creasing line, usually the surface of the outward direction will have cracks due to the tension. In fact, the paper is thicker this destruction is greater. Normally preclude the use of the creasing line in order to avoid the generation of cracks, in the production of the outer to the angle of contraction becomes introverted corner, so that you can make the corrugated box in the paper fibers do not hurt at the turning point, and have a neat appearance and maintain flexibility.